Please note that the below guide is for SparkOS 13.5.5 and I'm using an Indian variant of Redmi Note 10 Pro coded as sweetin, let's go!
IMPORTANT NOTE - USE SD CARD OR AN OTG PENDRIVE TO DO EVERYTHING, AND PC, OFCOURSE!
After you have unlocked the device bootloader, download the below files on your PC.
1. Platform tools - Extract it
2. Latest firmware (Global) - Keep the zip file as such
3. TWRP recovery - rename the downloaded image file to twrp
4. Spark OS rom file (Official) - Keep the zip file as such
1. PC Steps
- Take your phone to fastboot mode and connect it to your PC
- Back to PC, copy and paste twrp recovery file to platform tools folder
- Inside platform tools, Type cmd in the address bar and press enter and you should get a command prompt window
- Type the first command that's fastboot devices to check if your device is detected by your PC (you will see a code in the command prompt window)
- Type the second command that's fastboot flash recovery twrp.img and press enter and that's going to flash the recovery file
- Type the third command that's fastboot boot twrp.img and press enter and this is going to take your phone to recovery mode
2. TWRP Recovery steps
- Transfer twrp recovery from PC to SD card or an OTG pendrive
- On twrp recovery, tap on Install, then Select Storage and then Install Image
- Select twrp.img file, select recovery option and swipe to confirm flash
- Now twrp recovery is permanently flashed on your phone
3. Steps to flash the ROM
- Transfer the firmware and SparkOS ROM file from PC to SD card or an OTG pendrive
- Tap on Install > select firmware file and swipe to confirm flash
- Go back to main twrp page, tap on install and select SparkOS rom file > swipe to confirm flash
- Go back to twrp main page again > tap on wipe > format data > enter yes > click the tick button on keyboard
- Go back to twrp main page again > tap on reboot > tap on system, DONE!
IMPORTANT NOTE: You might get an error after flashing the global firmware or SparkOS rom (error will say that the package is for sweet not for sweetin). Follow the below steps
- Go back to main twrp page > tap on advanced > tap on terminal > type the below command and press tick on your keyboard, then go ahead and flash all the files without an error
resetprop ro.product.device sweet
NOTE: The first reboot might take a very long time and you might feel like the device is stuck on the logo page, wait for atleast 5-10 minutes before deciding anything else.
If you find the content useful, please make sure you SUBSCRIBE to my YouTube channel. Thank you.
Comments
Post a Comment